Zeddflow 12V DC 14W Submersible Dual Power Water Pump | Ultra-Low Noise 550L/H Lift 3m | Works on Solar & 12-14V Power Supply
A 12V DC brushless submersible water pump that runs quietly and reliably on a solar panel or a 12-14V power supply. It delivers up to 550L/H and lifts water about 3m at 12V (up to 3.5-4m at 14V). It suits fountains, vertical gardens, hydroponics, coolers and solar water setups.
Description
Quiet, efficient water movement on solar or DC power
The Zeddflow 12V DC 14W Submersible Dual Power Water Pump is built on a brushless (BLDC) motor, so it runs smoothly and quietly with very little wear. Run it from a 12-14V DC adapter or battery, or power it from a solar panel, and use it wherever you need dependable water flow without mains electricity.
Key features
- Dual power: Works on a 12-14V DC power supply or on solar power.
- Ultra-low noise: The brushless motor and fully submersible design keep operation nearly silent.
- Up to 0L/H flow: Good for fountains, planters, hydroponic systems and general water circulation.55
- Vertical lift of about 3m at 12V: At 14V the lift rises to roughly 3.5-4m. Flow decreases as lift increases.
- Fully submersible: The pump sits in the water, which also helps keep it cool.
- Long-life brushless motor: Made for continuous use with no carbon brushes to wear out.
Ideal for
- Solar water fountains and ponds
- Vertical gardens and balcony planters
- Hydroponic and drip systems
- Desert coolers and air coolers
- Aquariums, water features and small-scale water transfer
Using the pump with solar
The pump runs directly from a solar panel, but a typical panel puts out about 21V, which is above the pump’s rating. Always place an adjustable DC-DC buck converter (step-down regulator) between the panel and the pump, and set its output to 12-14V.
Installation and usage notes
- The pump must be fully submerged in water. It cannot draw water through a suction line from outside, so don’t place it on a dry or elevated surface.
- The lift figures were tested with 9mm ID soft tube, which is the recommended size. A wider pipe lowers lift capacity.
- Do not run the pump dry.
- Use with clean water. The pump is not certified for drinking water or salt water use.
Specifications
| Specification | Details |
|---|---|
| Power | 14W |
| Voltage | 12V DC (works up to 14V) |
| Motor | Brushless (BLDC) |
| Max flow | 550L/H |
| Max vertical lift | ~3m at 12V, ~3.5-4m at 14V |
| Recommended tube | 9mm ID soft tube |
| Type | Submersible |
| Power source | DC supply or solar (with buck converter) |
Additional information
| Weight | .230 kg |
|---|---|
| Dimensions | 8.5 × 5 × 7 cm |
| Dual Power Support | Operates with solar panels or 12–14V DC power supplies (2–3A) for flexible use. |
| High Flow Rate | Pumps up to 800L/H with a 3m lift capacity, ideal for irrigation, ponds, and aquariums. |
| Ultra‑Low Noise | Brushless DC motor ensures quiet operation (<35dB), perfect for home and garden setups. |
| Compact & Easy to Install | Lightweight design 220 grams with 1/2 BSP threaded inlet/outlet for secure connections. |
| Versatile Applications | Suitable for fountains, hydroponics, aquariums, and small irrigation systems. |
Reviews (0)
Reviews
There are no reviews yet.

-
0 Reviews